# FPV Basic Conecpts


# 1. Drone Anatomy

{% stepper %}
{% step %}

### The Skeleton: Frame

The frame is the carrier for all electronic equipment. It determines the drone's purpose and durability.

* Material: Most FPV frames use **3K Carbon Fiber** plates, balancing high strength with lightweight properties.
* Structure Types:
  * **True X:** The distance between the four motors to the center is equal. Perfect for racing and freestyle with the most balanced flight feel. (e.g., **GEPRC MARK4**)
  * **Wide X:** The left and right arms are spaced wider apart. Provides a clear view for the HD camera (no props in view) and more space for electronics. (e.g., **GEPRC MARK5**)
  * **DeadCat:** Front arms are swept back (resembling a dead cat lying flat). Designed to keep propellers out of the camera's view for cinematic footage. (e.g., **MARK5 DC**, **Moz7**)
  * **Whoop (Ducted):** Features protective ducts around the propellers. Ideal for safe indoor flying and filming near people. (e.g., **Cinelog Series**, **Cinebot Series**)
    {% endstep %}

{% step %}

### The Brain: Flight Controller (FC)

The FC is the intelligent core of the drone. It contains sensors like gyroscopes (to sense attitude) and accelerometers.

* Function: Calculates thousands of times per second to determine the drone's current angle and how to adjust motor speeds to keep it stable.
* Common Chips: F405 (cost-effective) and F722 (high performance).
* GEPRC Highlight: The **TAKER Series FC** (e.g., TAKER F722) features a full-coverage aluminum heatsink shell that protects sensitive components and helps prevent short circuits caused by debris.
  {% endstep %}

{% step %}

### The Heart: Electronic Speed Controller (ESC)

The ESC sits between the battery and the motors, acting as the power distribution center.

* Function: When the FC sends a command (e.g., "speed up the front-left motor"), the ESC converts the battery's DC power into the 3-phase AC power required by the motors, precisely controlling their speed.
* Form Factor: Modern FPV drones typically use a **4-in-1 ESC** (four individual ESCs integrated into one board). It is stacked with the FC; together they're commonly called the **"Stack"**.
* Specs: The amperage (A) rating indicates how much current it can handle. Example: a **TAKER 50A ESC** can sustain high current output, suitable for aggressive freestyle flying.
  {% endstep %}

{% step %}

### The Muscles: Brushless Motors

Motors provide the thrust for flight.

* Model Numbers (e.g., 2107.5):
  * The first two digits `21` represent the **stator diameter** (21mm).
  * The last two digits `07.5` represent the **stator height** (7.5mm).
  * Generally, larger size = higher torque and more power.
* KV Rating: Represents the increase in RPM for every 1V increase in voltage.
  * **High KV (e.g., 2650KV):** Faster rotation, typically for **4S** batteries.
  * **Low KV (e.g., 1850KV):** Higher torque, typically for **6S** batteries.
* GEPRC Representative: The **SPEEDX2 Series**, known for its hollow lightweight design and high impact resistance.
  {% endstep %}

{% step %}

### The Wings: Propellers

Propellers convert the motor's rotation into lift.

* Specs (e.g., 5146):
  * `5`: Represents 5 inches (diameter).
  * `46`: Represents the pitch (the distance the prop moves forward in one rotation). Higher pitch = higher top speed but more amp draw.
* Tri-blade vs. Pentablade:
  * **Tri-blade (3 blades):** High efficiency, great "pop" and response. Standard for **freestyle**.
  * **Pentablade (5 blades):** "Grippier" feel, quieter sound profile. Often used on **cinewhoops** for smoothness.
    {% endstep %}

{% step %}

### The Eyes: FPV System (Camera & VTX)

This is the soul of FPV (First Person View).

* Camera: Captures the video footage.
* VTX (Video Transmitter): Transmits the footage wirelessly to your goggles.
* Mainstream Options:
  * **DJI O3 / O4 Air Unit:** Digital HD system — currently the gold standard for image quality and range.
  * **Analog VTX:** Uses GEPRC **RAD Series** VTX. Lower image quality (TV static style) but offers extremely low latency and low cost.
    {% endstep %}

{% step %}

### The Ears: Receiver (RX)

The receiver listens to the commands sent from your remote controller on the ground.

* **ELRS (ExpressLRS):** Recommended open-source protocol. High refresh rates, long range, typically uses a T-shaped antenna.
* **TBS Crossfire:** Classic long-range choice (915MHz), also uses T-shaped antennas.
* **PNP (Plug and Play):** Refers to using the **DJI Air Unit's built-in receiver**. If using a DJI Remote Controller (2 or 3), an external receiver may not be needed.
  {% endstep %}
  {% endstepper %}

### Hardware Connection Diagram (Stack System)

* (Diagram placeholder — original content referenced a stack/system diagram. Keep or insert diagram as appropriate in GitBook.)

When repairing or replacing parts, always pay attention to the installation direction of the stack. The arrow on the Flight Controller board must point towards the front of the drone. If installed incorrectly, configure the "Board Alignment" in Betaflight Configurator — otherwise the drone may flip over immediately upon takeoff.


# 2. Drone Categories

FPV drones come in a wide variety of shapes and sizes. For beginners, the most intuitive way to classify them is based on **Purpose** and **Frame Structure**.

Choosing the right drone depends entirely on how you want to fly: Do you want to capture smooth, cinematic footage indoors? Or do you want to experience the adrenaline of extreme speed and freestyle tricks?

Here are the four main categories currently promoted by **GEPRC**:

{% stepper %}
{% step %}

### Cinewhoop (Ducted)

> **Keywords:** Safe, O4 HD Video, Cinematic, Indoor Filming

This is one of the most popular categories for content creators. Their defining feature is the **Propeller Guards (Ducts)**. This design significantly improves safety and optimizes aerodynamics for stable, low-speed flight.

#### Characteristics

* **High Safety:** The guards act as a buffer when hitting objects or people, making them perfect for flying indoors, around crowds, or in tight spaces.
* **Smooth Footage:** The flight feel is "locked-in" and stable. When paired with the latest **DJI O4 Air Unit**, the image quality rivals professional cinema cameras.
* **Payload:** Typically capable of carrying a **Naked GoPro** or **DJI Action** series camera.

#### GEPRC Recommendations

* **Cinelog Series (Cinelog35 V3 / Cinelog30 V3):** The classic workhorse has evolved to **V3**. Fully compatible with the DJI O4 Air Unit and featuring increased thrust, it is the top choice for carrying full-sized action cameras.
* **Cinebot Series (Cinebot25 V2):** The 2026 bestseller. The upgraded V2 version features stronger protection and intelligent **AI PID tuning presets**, making it perfect for urban exploration.
* **DarkStar Series (DarkStar16 / DarkStar22):** Designed for extreme light weight and low noise. Ideal for sound-sensitive environments like museums or libraries.
  {% endstep %}

{% step %}

### Cinematic Freestyle

> **Keywords:** Vapor Series, Versatile, Flow, Mid-to-Long Range

A rising category that sits between pure Freestyle and Long Range. It combines the agility of a freestyle quad with the stability needed for filming. It is the best tool for chasing cars, mountain surfing, and capturing dynamic open-world footage.

#### Characteristics

* **Optimized Structure:** Often uses a **DeadCat** geometry or special folding designs to ensure **no propellers appear in the camera view**.
* **Endurance:** Flies longer than pure racing drones, allowing you to compose long cinematic shots without battery anxiety.

#### GEPRC Recommendations

* **Vapor Series (Vapor-D5 / Vapor-X5):** GEPRC's latest lightweight flagship. Designed specifically for long flight times and silky-smooth handling, it is the 2025 weapon of choice for mountain surfing and car chasing.
* **MARK5 DC O4 Pro:** A **DeadCat** version based on the classic MARK5 frame, optimized for the O4 system to eliminate prop view in your FPV feed.
  {% endstep %}

{% step %}

### Hardcore Freestyle

> **Keywords:** Durable, High Power, Tricks, Bashing

This is the core spirit of FPV. Usually 5-inch drones, designed with pure performance and durability in mind. If you see videos of drones diving down skyscrapers or flipping through abandoned buildings (Bandos), that is Freestyle.

#### Characteristics

* **Overpowered:** Extremely high thrust-to-weight ratio with instant throttle response.
* **Rugged Build:** Uses thick carbon fiber arms and 7075 aluminum parts to withstand high-impact **crashes**.
* **Agility:** Capable of performing complex tricks like Power Loops and Matty Flips.

#### GEPRC Recommendations

* **MARK5 O4 Pro (Wide X):** Our star performer. The O4 Pro version retains the unique **Wide X** geometry (solving the "Jello effect") while perfectly accommodating the larger O4 Air Unit.
  {% endstep %}

{% step %}

### Long Range (LR)

> **Keywords:** Endurance, GPS, High Altitude, Cruising

If you want to climb mountain peaks, cross straits, or explore scenery kilometers away, you need a Long Range drone. These drones sacrifice some "punch" (burst power) in exchange for extreme motor efficiency and long flight times.

#### Characteristics

* **Extreme Endurance:** When paired with **Li-ion batteries**, flight times typically range from **20 to 40 minutes**.
* **Mandatory GPS:** Equipped with high-performance M10 GPS modules, featuring **"Return to Home" (RTH)** capabilities in case of signal loss.

#### GEPRC Recommendations

* **MOZ7 V2:** The latest upgrade to our 7-inch flagship. Features reinforced side plates and O4 compatibility. It has immense payload capacity and wind resistance, ideal for high-altitude adventures.
* **Tern-LR40:** A new choice for 4-inch lightweight long range. Its foldable design makes it highly portable, perfect for hiking and backpacking.
  {% endstep %}
  {% endstepper %}

## Quick Selection Guide

| Your Primary Use Case                     | Recommended Category | GEPRC Latest Model (2025/2026) |
| ----------------------------------------- | -------------------- | ------------------------------ |
| **Indoor / Vlogging / People**            | Cinewhoop            | **Cinebot25 V2**, DarkStar22   |
| **All-rounder / Mountain / Car Chasing**  | Cinematic Freestyle  | **Vapor-D5**, Cinelog35 V3     |
| **Skill Training / Tricks / Bashing**     | Freestyle            | **MARK5 O4 Pro**               |
| **Mountain Surfing / Cloud Surfing / LR** | Long Range           | **MOZ7 V2**, Tern-LR40         |


# 3. FPV Glossary

Entering the FPV hobby feels like learning a new language. We have compiled the most common technical terms, acronyms, and slang used in the drone community to help you get started.

{% stepper %}
{% step %}

### Purchasing & Kits (Must Read Before Buying)

This is the most confusing part for beginners. Choosing the wrong version means you won't be able to fly when you unbox it.

| Term          | Full Name               | Meaning & Explanation                                                                                                                                                                                                                                                                  |
| ------------- | ----------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **RTF**       | **Ready To Fly**        | <p><strong>Complete Kit.</strong> Includes the drone, radio controller, goggles, batteries, and charger. You can fly immediately after charging.<br><em>(GEPRC Example: TinyGO Kit)</em></p>                                                                                           |
| **BNF**       | **Bind And Fly**        | **Drone Only (Pre-built).** Includes a fully assembled and tuned drone. **Does NOT include** radio or goggles. You need to provide your own radio and "Bind" it to the drone's receiver before flying.                                                                                 |
| **PNP**       | **Plug And Play**       | <p><strong>No Receiver Installed.</strong><br>1. If you use <strong>DJI Remote Controller 2 or 3</strong>, buy this version to connect directly to the Air Unit.<br>2. If you use a specific receiver not listed (e.g., a specific Futaba), buy this and solder your own receiver.</p> |
| **ARF**       | **Almost Ready to Fly** | **DIY Kit.** Usually includes all parts but requires you to assemble, solder, and tune the drone yourself.                                                                                                                                                                             |
| {% endstep %} |                         |                                                                                                                                                                                                                                                                                        |

{% step %}

### Hardware & Electronics (Specs Guide)

| Term          | Full Name                       | Meaning & Explanation                                                                                                                                                                               |
| ------------- | ------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **FC**        | **Flight Controller**           | The **"Brain"** of the drone. It contains sensors (gyro) and calculates the drone's attitude and flight stability.                                                                                  |
| **ESC**       | **Electronic Speed Controller** | The component that controls motor speed. Modern drones typically use a **4-in-1 ESC** (four ESCs integrated into one board).                                                                        |
| **Stack**     | **Flight Stack**                | <p>Refers to the FC and ESC mounted together in a stack structure.<br><em>(GEPRC Example: TAKER F722 Stack)</em></p>                                                                                |
| **AIO**       | **All In One**                  | <p>A board where the FC and ESC are integrated into a single PCB. Common on Whoops and toothpicks to save weight.<br><em>(GEPRC Example: TAKER G4 AIO)</em></p>                                     |
| **VTX**       | **Video Transmitter**           | Transmits the video feed from the camera to your goggles. Divided into **Analog** and **Digital** (e.g., DJI O3 Air Unit).                                                                          |
| **BEC**       | **Battery Elimination Circuit** | A voltage regulator on the FC/ESC. It converts high battery voltage (e.g., 25V) down to 5V or 10V to power the VTX and Camera. **Note:** When using DJI O3, ensure the BEC supports **10V output**. |
| **Li-Po**     | **Lithium Polymer**             | The standard battery type for FPV. High power output but sensitive. **Never over-discharge** (below 3.5V per cell) or it will be permanently damaged.                                               |
| {% endstep %} |                                 |                                                                                                                                                                                                     |

{% step %}

### Flight & Settings (Operations Guide)

| Term             | Meaning & Explanation                                                                                                                                                                                                                                      |
| ---------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Bind**         | The process of pairing your radio controller with the drone's receiver so they can communicate ("Handshake").                                                                                                                                              |
| **FailSafe**     | <p>A safety mechanism triggered when the drone loses radio signal.<br>1. <strong>Drop:</strong> Motors stop immediately (Default for Freestyle).<br>2. <strong>GPS Rescue:</strong> The drone attempts to fly back to the home point (For Long Range).</p> |
| **OSD**          | **On Screen Display.** The flight data text overlaid on your video feed inside the goggles (e.g., Battery Voltage, Timer, Artificial Horizon).                                                                                                             |
| **Acro Mode**    | **Manual Mode / Air Mode.** The standard mode for FPV. The drone **does not auto-level** when you release the sticks. This allows for flips, rolls, and smooth cinematic lines.                                                                            |
| **Angle Mode**   | **Self-Leveling Mode.** The drone automatically returns to a flat, level position when you release the sticks. Useful for beginners or emergencies.                                                                                                        |
| **Turtle Mode**  | **Flip Over After Crash.** A feature that reverses two motors to flip the drone back over if it lands upside down. Saves you the walk of shame!                                                                                                            |
| **Jello**        | **Jello Effect.** High-frequency vibrations in the video feed that look like wobbling jelly. Causes: Damaged props, loose screws, or bad PID tuning.                                                                                                       |
| **PID**          | **Proportional-Integral-Derivative.** A control loop mechanism. Tuning PIDs changes how the drone feels and responds. *(GEPRC drones come pre-tuned, so beginners rarely need to touch this).*                                                             |
| {% endstep %}    |                                                                                                                                                                                                                                                            |
| {% endstepper %} |                                                                                                                                                                                                                                                            |

{% hint style="info" %}
If you messed up your settings in Betaflight and the drone flies weirdly (or won't arm), don't panic!

Go to the **"Support / Download Center"** on our official website (`geprc.com`), download the **Factory CLI (Command Line)** file for your specific model, and load it in Betaflight. This will restore the drone to its original factory state.
{% endhint %}


# 4. VTX & Receiver Guide

When purchasing a GEPRC **BNF (Bind-N-Fly)** drone, you will see several options in the dropdown menu (e.g., ELRS 2.4G, DJI PNP, TBS Nano). Choosing the correct version is critical to ensure the drone can connect to your radio controller and goggles.

{% stepper %}
{% step %}

### Our Eyes: Video Transmission System (VTX)

The VTX transmits the real-time video feed from the drone to your goggles. GEPRC currently offers the following main solutions:

#### DJI Digital HD System (Mainstream Recommendation)

Currently provides the best user experience and image quality.

* **DJI O4 Air Unit:** The latest flagship system with extreme penetration and signal stability.
  * Compatible Goggles: **DJI Goggles 3**.
* **DJI O3 Air Unit:** The classic choice featuring 4K/60fps onboard recording and RockSteady stabilization.
  * Compatible Goggles: **DJI Goggles 2**, **Goggles Integra**, and **DJI FPV Goggles V2**.
* **RunCam Link (Wasp / Phoenix):** A cost-effective HD solution (formerly known as the Caddx Vista system). Good for budget builds.

#### Analog VTX

* Features: extremely low cost and ultra-low latency, but lower image quality (similar to old TV signals with "static" or "snow").
* Best For: Budget entry-level pilots or specific racing scenarios where latency is the only priority.
  {% endstep %}

{% step %}

### Our Ears: Receiver Options (RX)

This is where beginners make the most mistakes. **The receiver on the drone must match the protocol of your radio controller.**

| Option Name      | Radio Protocol            | Recommended | Notes                                                                                                                                                              |
| ---------------- | ------------------------- | ----------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| **ELRS 2.4G**    | ExpressLRS 2.4G           | ⭐⭐⭐⭐⭐       | **Most Popular & Best Value.** Choose this if you have a Radiomaster radio (e.g., Zorro, Boxer, TX16S) that is the **ELRS Version**.                               |
| **DJI PNP**      | DJI O3/O4 Native Protocol | ⭐⭐⭐⭐        | **Plug and Play (No external receiver).** Choose this if you use the **DJI FPV Remote Controller 2 or 3**. It uses the Air Unit's built-in receiver functionality. |
| **TBS Nano RX**  | TBS Crossfire             | ⭐⭐⭐         | A classic high-performance long-range protocol (915MHz). Choose this only if you already own a TBS Crossfire module or radio.                                      |
| {% endstep %}    |                           |             |                                                                                                                                                                    |
| {% endstepper %} |                           |             |                                                                                                                                                                    |

{% hint style="warning" %}

### ⚠️ Compatibility Warning (Read Carefully)

1. **For DJI Radio Users:**\
   If you are buying a drone with the **DJI O3 or O4 Air Unit** and you plan to use the **DJI FPV Remote Controller 2 or 3**, please select the **PNP** version. You do not need to pay extra for an ELRS or TBS receiver.
2. **For Radiomaster Users:**\
   If you have a Radiomaster radio (e.g., TX12 / Zorro / Boxer), please check if your radio is the **ELRS Version** or the **4-in-1 Version**.
   * If your radio is **4-in-1**, it cannot connect to an ELRS drone directly. You will need to buy an external **ELRS Module** for the back of your radio.
     {% endhint %}


# FPV Essential Tools


# 1. Software Setup & Drivers

{% hint style="warning" %}
🛑 Step 1: Most Connection Failures Are Due to the Cable!

Before downloading any software, please check the USB cable in your hand:

* **It MUST be a Data Cable:** Many cables that come with phones (especially the cheap white ones) are for **Charging Only** and cannot transmit data.
* **How to Test:** Connect your phone to your computer with the cable. If the computer can read files or photos from your phone, it is a data cable. If it only charges with no reaction from the PC, **please swap the cable immediately**.
* **Interface Type:** Modern GEPRC Flight Controllers (like the TAKER series) and DJI Air Units use the **Type-C** interface.
  {% endhint %}

{% stepper %}
{% step %}

### Betaflight Configurator (The Ground Station)

This is the core software for FPV drones. You will use it to set flight controller parameters, check radio signals, and verify motor direction.

* For: All GEPRC drones (based on Betaflight firmware).
* Download: [GitHub Release Page](https://github.com/betaflight/betaflight-configurator/releases)
* Version Selection:
  * Please download the **Latest** version from the list.
  * **Windows:** Download the `.exe` installer.
  * **macOS:** Download the `.dmg` installer.

{% hint style="info" %}
GEPRC Tip: Our BNF drones come factory-tuned with optimal PID and filter settings. **Beginners should only use this software to check settings (e.g., verifying receiver input). Please avoid changing PID data unless necessary.**
{% endhint %}
{% endstep %}

{% step %}

### Driver Installation

Without drivers, your computer cannot recognize the flight controller, and Betaflight will show "Failed to open serial port" in the top right corner.

#### Windows Users (Must Read)

Windows can be picky and often requires manual driver installation.

CP210x Driver (Most Common)

* Most flight controller chips need this driver to simulate the serial port.
* CP210x Driver: [Download](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers)

ImpulseRC Driver Fixer (The Lifesaver)

* Scenario: If Betaflight refuses to connect, or if you cannot enter **DFU Mode** when flashing firmware.
* Operation:

{% stepper %}
{% step %}
Download and run this tool (no installation required).
{% endstep %}

{% step %}
Power on the FC and plug in the USB.
{% endstep %}

{% step %}
The tool will automatically search for and fix driver issues.
{% endstep %}
{% endstepper %}

Driver Fixer: [Download](https://impulserc.blob.core.windows.net/utilities/ImpulseRC_Driver_Fixer.exe)

#### macOS Users

Mac systems are generally hassle-free and come with built-in drivers.

* Permission Issues: If the software shows no reaction, check your data cable first.
* App Won't Open: If it says "Cannot verify developer" or "App is damaged":
  1. Go to **System Settings** -> **Privacy & Security**.
  2. Scroll down to the security section and click **Open Anyway**.
     {% endstep %}

{% step %}

### DJI Assistant 2 (Essential for O3/O4)

If you bought a drone with a **DJI O3 / O4 Air Unit**, you must install this software to activate the device and update firmware.

* ⚠️ Version Warning: DJI has many versions of Assistant 2. **Do not download the wrong one!**
* Correct Version: **DJI Assistant 2 (Consumer Drones Series)**
* Download: [DJI Official Download Center](https://www.dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series)&#x20;

Main Uses:

* Activate a brand new O3/O4 Air Unit (It will stay in overheat protection mode until activated).
* Disable Low Power Mode.
* Update firmware to match Goggles 3 or Goggles 2.
  {% endstep %}

{% step %}

### Advanced Tools (Optional)

As you gain experience and want to replace motors or receivers yourself, you might need these:

#### ESC Configurator

* Format: Web-based (Chrome browser recommended).
* Address: <https://esc-configurator.com/>
* Uses:
  * Change motor direction (e.g., if a motor is spinning the wrong way after replacing it, fix it here without resoldering).
  * Flash **Bluejay Firmware** (Enables Bidirectional DSHOT for smoother flight).

#### ExpressLRS Configurator

* Format: Desktop Software.
* Download: [GitHub Page](https://github.com/ExpressLRS/ExpressLRS-Configurator/releases)
* Uses:
  * Update firmware or change the **Binding Phrase** for your ELRS receiver.
  * Note: Most modern ELRS receivers can now be updated via Wi-Fi, so this software is not always strictly necessary.
    {% endstep %}
    {% endstepper %}

### FAQ

<details>

<summary>Q: I plugged in the USB, the FC lights are on, but the computer doesn't react?</summary>

A: 99% of the time, this is a **cable issue**. Please swap to a known data cable. It could also be insufficient power from the USB port (try a port on the back of your PC case).

</details>

<details>

<summary>Q: Why is the 3D model in Betaflight spinning slowly?</summary>

A: Place the drone on a flat surface. If the model still drifts while stationary, the gyroscope likely needs calibration. Click the **"Calibrate Accelerometer"** button on the "Setup" tab.

</details>


# 2. Hardware Tools

Unlike consumer camera drones (like DJI Mavics), FPV drones require high-frequency maintenance. Whether it is replacing a broken arm after a crash, re-soldering a severed motor wire, or simply tightening screws as part of a routine check, you need the right tools.

As the saying goes, "A workman must sharpen his tools if he is to do his work well." A good set of tools will save you time, frustration, and prevent you from stripping screws.

{% stepper %}
{% step %}

### The Essentials: Hex Drivers

99% of the fasteners on an FPV drone are Hex (Allen) screws.

{% hint style="danger" %}
**CRITICAL WARNING: Throw Away the Free L-Keys!**

When you buy a drone or a frame, you often get free L-shaped hex keys. **Please throw them in the trash** or keep them only for absolute emergencies.

Reason: These cheap keys are made of soft metal and have poor tolerance. They will easily **strip (round off)** the heads of delicate 1.5mm screws. Once a motor screw is stripped, removing it is a nightmare.
{% endhint %}

#### Recommended Specs

We highly recommend buying **S2 Steel** handled screwdrivers.

| Size          | Common Usage                                                                                    | Notes                                                                                     |
| ------------- | ----------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------- |
| **1.5 mm**    | **Most Critical!** Used for motor screws, small camera screws, and M2 stack screws.             | This size strips the easiest. Buy the highest quality driver you can afford for this one. |
| **2.0 mm**    | **Most Common.** Used for arm bolts, M3 standoffs, and stack bolts.                             | The standard screw size for most GEPRC frames.                                            |
| **2.5 mm**    | Less Common. Usually found on larger structural parts of 5-inch or 7-inch drones (e.g., MARK5). |                                                                                           |
| **Phillips**  | Occasionally used for camera back covers or older accessories.                                  | Keep a small Phillips head driver handy just in case.                                     |
| {% endstep %} |                                                                                                 |                                                                                           |

{% step %}

### Propeller Tools

Different drones require different tools to change propellers.

#### For 5-inch / 7-inch Drones (e.g., MARK5, MOZ7)

* Tool: **M8 Socket Driver (8mm)**
* Use: To remove and tighten M5 Lock Nuts.
* Recommendation: Get a socket driver with a built-in **one-way ratchet** or a dedicated FPV prop tool. It makes changing props much faster and is very satisfying to use.

#### For Whoops / Micros (e.g., Cinebot, DarkStar)

* Tool: **1.5 mm Hex Driver**
* Use: These smaller drones usually secure propellers directly to the motor bell using two **M2 screws**. No socket driver is needed.
  {% endstep %}

{% step %}

### Soldering & Electrical Tools

Wires break, and eventually, you will need to replace a receiver or motor. Soldering is a mandatory skill for FPV pilots.

#### The "Holy Trinity" of Soldering

1. Soldering Iron:
   * Recommendation: Portable smart irons like **TS100 / TS101 / Pinecil**.
   * Pros: Heats up in seconds, compact, and can be powered by a PD charger or even a 4S/6S LiPo battery in the field. Perfect for field repairs.
2. Solder Wire:
   * Avoid: Beginners should **avoid Lead-Free solder** (it has a high melting point and is difficult to work with).
   * Recommendation: **63/37 Leaded Solder**. It has a low melting point, flows well, and creates shiny, solid joints.
3. Flux:
   * Role: The soul of soldering. Apply a little flux to the pads, and the solder will flow like water, preventing solder bridges and cold joints.

{% hint style="info" %}
The "Holy Trinity" above covers the minimum for reliable soldering and field repairs.
{% endhint %}

#### The Lifesaver: Multimeter

* Use: Every time you touch a soldering iron to your drone, **you MUST use a multimeter in "Continuity Mode" (Beep Mode)** to check the positive (+) and negative (-) terminals before plugging in a battery.
* Verdict:
  * Long Beep: Short circuit detected! **DO NOT plug in the battery.**
  * Silence (or short chirp): Safe to power up.

{% hint style="warning" %}
If you plug in a battery with a short circuit, you will release the "Magic Smoke" and destroy your electronics instantly.
{% endhint %}
{% endstep %}

{% step %}

### Consumables & Adhesives

* Threadlocker (Loctite):
  * Recommendation: **Blue (Medium Strength)**, such as Loctite 243.
  * Usage: Apply a tiny drop to motor screws and arm screws to prevent vibrations from loosening them.

{% hint style="danger" %}
**NEVER** let threadlocker touch plastic parts (like propellers or prop guards). It causes a chemical reaction that makes plastic brittle and crack instantly!
{% endhint %}

* Electrical / Acetate Tape:
  * Used to bundle motor wires to the arms, preventing them from catching in the propellers.
* Zip Ties (Cable Ties):
  * Used to secure receiver antennas, power leads, and capacitors. An FPV pilot can never have enough zip ties.
    {% endstep %}
    {% endstepper %}

{% hint style="info" %}
GEPRC Repair Tip:

If you crash your **MARK5** or **Cinebot** and break an arm, you will need to remove the motor to replace the arm.

* Try to keep the motor wires **as long as possible**. Do not cut them short; you might need to move that motor to a different frame later.
* If you are unsure which wire goes to which pad, check the **"Wiring Diagram"** on our official website product page, or simply **take a photo** with your phone before desoldering.
  {% endhint %}


# 3. Downloads

Here, we have gathered all the core resources required for maintaining your GEPRC products. We highly recommend **bookmarking this page**.

***

## GEPRC Official Resources (Most Important)

If you accidentally clicked "Reset to Defaults" in Betaflight, or simply want to restore your drone to its factory state, you need these files.

### 🏭 Factory CLI / Dump Files

**This is the "Soul" of your drone.**\
It contains the PID loop, filters, OSD layout, and port settings specifically tuned by GEPRC engineers for your specific model.

* **Download Source:** [GEPRC Download Center](https://geprc.com/downloads/)
* **How to Use:** Follow the steps below.

{% stepper %}
{% step %}

### Locate your model on GEPRC website

Go to the GEPRC Download Center and find your model (e.g., "Cinebot30" or "MARK5").
{% endstep %}

{% step %}

### Download the correct file

Download the `.txt` or `.diff` file corresponding to your receiver version (e.g., ELRS 2.4G or TBS).
{% endstep %}

{% step %}

### Open Betaflight Configurator

Launch Betaflight Configurator, connect your drone, and go to the CLI tab.
{% endstep %}

{% step %}

### Load the factory dump

Click "Load from file" and select the file you just downloaded.
{% endstep %}

{% step %}

### Save and reboot

Type `save` in the CLI text box and hit Enter. Your drone will reboot and be restored.
{% endstep %}
{% endstepper %}

***

### 📖 Product Manuals & Wiring Diagrams

If you forgot where to solder a wire or need to check the detailed pin definitions of your Flight Controller.

* **Download Source:** [GEPRC Support Manuals](https://geprc.com/support/manuals/)
* **Content Includes:**
  * High-definition Wiring Diagrams for Stacks.
  * Frame Assembly Exploded Views.
  * VTX Frequency Tables (VTX Tables).

***

## Flight Controller Firmware (Betaflight)

This is the operating system of your FPV drone.

{% hint style="warning" %}
Generally, if the drone flies well, do NOT upgrade the firmware version. New firmware versions often require completely different PID tuning. Upgrading without re-tuning may cause the drone to fly poorly or overheat.
{% endhint %}

* **Betaflight Configurator (Software):** [Download (GitHub)](https://github.com/betaflight/betaflight-configurator/releases)
* **Betaflight Firmware (Source):** [Download (Github)](https://github.com/betaflight/betaflight/releases)
* **Common GEPRC Firmware Targets:**
  * Most modern models use: `GEPRC_F722_BT_HD` or `GEPRC_F405`.
  * Note: Always check the silkscreen print on your Flight Controller board to confirm the correct target before flashing!

***

## VTX & Radio Link Resources

### 📡 DJI Digital HD System

Used to activate O3/O4 Air Units or update Goggles firmware.

* DJI Assistant 2 (Consumer Drones Series): [Download from DJI](https://www.dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series)
  * For: DJI O3 Air Unit, DJI O4 Air Unit, Avata, Goggles 2 / 3 / Integra.
* DJI Assistant 2 (DJI FPV Series): [Download from DJI](https://www.dji.com/downloads/softwares/dji-assistant-2-dji-fpv-series)
  * For: The older DJI FPV Goggles V2 (Black V2 Goggles).

### 📻 ExpressLRS (ELRS)

If your ELRS receiver cannot connect to your radio, you may need to update the firmware to match your **Binding Phrase**.

* ELRS Configurator: [Download (GitHub)](https://github.com/ExpressLRS/ExpressLRS-Configurator/releases)
* Lua Script: Used to change settings directly on your radio screen. (Usually downloaded within the Configurator).

### 🐑 TBS Crossfire

* TBS Agent X/M: [Download from TBS](https://www.team-blacksheep.com/products/prod:agentx)
  * Used to update firmware for TBS Crossfire modules and Nano RX receivers.

***

## First Aid Kit (Troubleshooting)

| Issue Description                         | What to Download?                 | Notes                                                              |
| ----------------------------------------- | --------------------------------- | ------------------------------------------------------------------ |
| **Betaflight won't connect**              | **ImpulseRC Driver Fixer**        | Essential driver repair tool for Windows users.                    |
| **Drone flies weird / Settings lost**     | **GEPRC Factory CLI**             | Flashing the factory dump solves 90% of flight performance issues. |
| **ESC firmware lost / Motors won't spin** | **BLHeli / Bluejay Configurator** | Use the web-based configurator to re-flash ESC firmware.           |

***

{% hint style="info" %}
GEPRC Pro Tip: Regarding Firmware Upgrades

Many beginners feel the urge to always update Betaflight to the absolute latest version (e.g., from 4.3 to 4.5). Please be warned: flashing new Betaflight firmware **wipes all GEPRC factory presets!** If you absolutely must upgrade, type `diff all` in the CLI and save a backup first. You will need to manually migrate your settings back.

Conclusion: For most pilots, Factory Firmware is the Best Firmware. Don't change it unless you have to!
{% endhint %}


# FPV Safety Guide


# 1. Golden Rules

Please read this chapter carefully before starting your FPV journey. An FPV drone is **NOT a toy**. Its high-speed rotating propellers and high-performance power system pose significant risks if mishandled.

***

{% hint style="danger" %}
⚠️ Disclaimer

By purchasing, assembling, or using **GEPRC** products, you acknowledge that you have read, understood, and agreed to all terms of this statement.
{% endhint %}

### 1. Not a Toy

* This product is designed for hobbyists aged **14 and older** with full civil capacity. Users under 14 must operate under the supervision of an experienced adult.
* This product contains high-speed rotating parts and precision electronics. Improper operation may result in property damage, personal injury, or even death.

### 2. Safety & Responsibility

* **Fly Legally:** The user promises to fly only in legal and safe areas. **Strictly prohibited** areas include airports, military zones, crowded areas (e.g., city squares, over people's heads), and near power lines.
* **Compliance:** Users are responsible for understanding and complying with local radio regulations and drone laws (e.g., **FAA regulations in the US**, **EASA regulations in Europe**, or your local equivalent).
* **Liability:** GEPRC accepts no liability for any direct or indirect losses (including but not limited to crashes, personal injury, or damage to public property) caused by violation of local laws, improper operation, or force majeure.

### 3. Modifications & Firmware

* GEPRC is responsible for the product's factory condition. Any user modifications—such as structural changes, soldering, or altering firmware parameters not recommended by officials (e.g., randomly changing PIDs or filters causing motor burnout)—are **NOT covered by warranty**.

### 4. Battery Safety

* Lithium Polymer (LiPo) batteries are flammable. GEPRC is not responsible for fires caused by user errors such as over-charging, over-discharging, short-circuiting, or using damaged batteries.

***

## 🛑 The Golden Rules of Flight

To protect yourself, others, and your drone, please etch these 4 rules into your brain and make them muscle memory.

### Rule #1: NO PROPS on Bench

> **This is the most common mistake beginners make, and the one that causes the most injuries.**

* **The Rule:** Whether you are connecting to Betaflight to tune settings, flashing ESC firmware, or simply testing motor direction... **If the drone is connected to a computer via USB, you MUST remove all propellers.**
* **Why?** A slight glitch in the software or radio interference could cause the motors to spin up to full speed instantly. A motor with a propeller is like a high-speed blender—it can slice fingers or shatter a monitor in a split second.

### Rule #2: Correct Power Sequence

Remember the mantra: **"Radio First, Drone Second. Drone Off, Radio Off."**

{% stepper %}
{% step %}

### Powering ON

* Turn on your **Radio Controller** first. Ensure the throttle is at zero and the switch is Disarmed.
* Then, plug in the drone's battery.
  {% endstep %}

{% step %}

### Powering OFF

* Unplug the drone's battery first.

* Then, turn off your Radio Controller.
  {% endstep %}
  {% endstepper %}

* **Why?** If you turn off the radio while the drone is still powered, the drone might interpret background radio noise as a throttle command and take off unexpectedly (although modern protocols like ELRS have failsafes, this remains the standard operating procedure).

### Rule #3: Finger Always on the "Trigger" (Disarm)

* **The Rule:** During the entire flight, your finger must rest on the **ARM/DISARM Switch**.
* **Muscle Memory:** In any uncontrolled situation (hitting a wall, getting stuck in a tree, drone freaking out, video loss), your brain's first reaction must be to **Flip the Switch to DISARM**, not to push the throttle to save it.
* **Why?**
  * **Protect People:** Disarming stops the motors immediately, turning the drone into a falling brick, preventing continuous cutting injuries.
  * **Protect the Drone:** If the drone is stuck in a tree or grass and you keep pushing the throttle to "wiggle it out," the blocked motors will overheat and **burn out** within seconds.

### Rule #4: Visual Line of Sight (VLOS) & Spotter

* **The Rule:** When flying with FPV goggles, it is highly recommended to have a **Spotter** next to you.
* **Why?** When wearing goggles, you are "blind" to your physical surroundings. You cannot see if someone is walking up to you or if your drone is flying over people. A spotter can warn you of environmental risks.
* **Special Note for Long Range:** If you are using a Long Range model (e.g., **MOZ7**, **Crocodile**), you **MUST** confirm that GPS satellite lock is complete (usually > 7 satellites) and the **"Home Point"** is updated in the OSD before taking off. Otherwise, the Return-to-Home function will fail.

***

{% hint style="info" %}
💡 GEPRC Official Advice:

For your very first flight, please choose a **wide-open grassy field**. **Do not** attempt your first flight in your living room or a narrow hallway. Grass is the best cushion and will save you a lot of money on repairs.
{% endhint %}


# 2. Pre Flight Checklist

Developing a solid pre-flight routine can prevent **90%** of unexpected crashes. Even GEPRC Team Pilots, who have flown thousands of packs, mentally go through these steps before plugging in every battery.

We recommend saving a screenshot of this page on your phone to check against whenever you go out to fly.

## Mechanical Check

> **Goal:** Ensure the drone's structural integrity so it doesn't fall apart in mid-air.

* [ ] **Propeller Tightness:** Gently flick all propellers with your finger to ensure the nuts are tight and the props are not loose or slipping.
* [ ] **Propeller Condition:** Check the edges of the props for severe chips or cracks.\
  *Damaged props cause severe vibrations ("Jello effect") and can even explode in mid-air.*
* [ ] **Battery Security:**
  * The **Battery Strap** must be cinched tight. The battery should not move at all if you shake the drone.
  * **CRITICAL:** Ensure the **Power Lead** (XT60) and **Balance Plug** are tucked away securely. They must **NOT** touch the rotating propellers.
* [ ] **Arms & Screws:** Quickly check if any arm screws are loose. Check the carbon fiber plates for any visible **delamination** (splitting layers) or cracks.
* [ ] **Antenna Check:** Are the Receiver and VTX antennas secure?\
  *If a VTX antenna comes loose during flight, the VTX chip can burn out instantly due to overheating.*

## System Check

> **Goal:** Ensure the "Brain" (FC) and "Senses" (Video/Control) are communicating normally.

* [ ] **Radio Battery:** Confirm your Radio Controller has sufficient charge and all switches are in their default positions (Throttle at zero, Switch in **Disarmed** state).
* [ ] **Drone Battery Voltage:** Check via OSD or a voltage checker to ensure a full charge.
  * **4S Battery:** Full charge is approx. **16.8V**.
  * **6S Battery:** Full charge is approx. **25.2V**.
  * **Per Cell:** Should be **4.20V**. If a cell is below **4.0V**, do not take off.
* [ ] **Video Feed:** Put on your goggles. Confirm the video is clear, with no abnormal static or black screen. Check if OSD data is displaying correctly (Voltage, Flight Mode).
* [ ] **GPS Lock (Essential for Long Range):**
  * If you are using **MOZ7**, **Crocodile**, or **Cinebot25 V2 (GPS Version)**.
  * **WAIT** until the satellite icon in the OSD shows **> 7 satellites**.
  * **CONFIRM** the OSD says **"GPS 3D Fix"**.
  * **CHECK** that the "Distance" data has reset to zero and the **Home Point** is updated.\
    *Warning: If you take off before getting a GPS lock, the "Return to Home" (RTH) function will fail 100%!*

## Site Assessment

> **Goal:** Ensure the flight area is safe and complies with local regulations.

* [ ] **Distance from Crowds:** Ensure no uninvolved people are within 30 meters of the takeoff point. **Strictly prohibited** to fly directly over people.
* [ ] **Signal Interference:** Look for large signal towers, high-voltage power lines, or large metal structures nearby (these will severely interfere with VTX and Radio signals).
* [ ] **Weather Conditions:** Confirm there is no rain (water is the enemy of electronics). Ensure wind speed is within the drone's capability (TinyWhoops can't handle wind; 5-inch drones are more stable).

## Ready to Fly (RTF)

> **Goal:** Final confirmation before lift-off.

{% stepper %}
{% step %}

### Placement

Place the drone on **flat, level ground**.\
(If placed on a slope or in tall grass, the gyroscope self-check might fail, preventing the drone from arming).
{% endstep %}

{% step %}

### Stand Back

Step back at least **3-5 meters** for safety.
{% endstep %}

{% step %}

### Arm

Flip the Arm switch.
{% endstep %}

{% step %}

### Idle Check

Listen to the motors. Is the sound smooth and even? Are all four props spinning?
{% endstep %}

{% step %}

### Hover Test

Gently raise the throttle to hover 1 meter off the ground. Wiggle the roll/pitch stick slightly to confirm the drone moves in the same direction as your stick inputs.
{% endstep %}

{% step %}

### Go!

If everything feels right, enjoy your flight.
{% endstep %}
{% endstepper %}

{% hint style="info" %}
💡 Post-Crash Check

If you crash and recover your drone, **DO NOT immediately re-arm and take off!** Please repeat **Mechanical Check**.

Pay special attention to:

* **Sand in Motors:** Spin the motors by hand. If you feel resistance or hear a "gritty" scratching sound, **do not fly**. Forcing it to spin will burn out the motor coating.
* **Battery Condition:** Is the battery deformed, puffed, or punctured? (Damaged batteries are a fire hazard—**dispose of them immediately**).
  {% endhint %}


# 3. Emergency & FailSafe

The beauty of FPV lies in its freedom, but risks are always present. When signal loss occurs or unexpected situations arise, knowing the correct response can save your drone and prevent safety incidents.

***

## 1. Understanding Failsafe Mechanisms

Failsafe is the most fundamental safety net for FPV drones. When the receiver stops receiving a signal from the radio controller for a set time (usually **0.4s - 1.0s**), the Flight Controller (FC) automatically takes over.

GEPRC drones typically ship with one of two default protection logics, depending on the model:

### A. Drop (Freefall) - Default Setting

> **Applicable Models:** MARK5, Cinebot, Cinelog, DarkStar, TinyGO, and most non-GPS models.

* **Behavior:** The motors stop spinning immediately, and the drone falls like a stone.
* **Why this setting?** For drones without GPS, this is the safest option. It prevents the drone from maintaining throttle and flying away ("Fly Away") or drifting into people/property when control is lost.

### B. GPS Rescue Mode

> **Applicable Models:** MOZ7, Crocodile Series, and Cinebot30 (GPS Version).

* **Behavior:**
  1. The drone rapidly **climbs** to a set altitude (usually 20-30 meters above the max altitude of the flight).
  2. It automatically turns towards the **"Home Point"** and flies back.
  3. Once within signal range, you can move the sticks to regain control.

{% hint style="danger" %}
**⚠️ CRITICAL WARNING:**\
Betaflight's GPS Rescue is not DJI RTH. It is "dumb" and "aggressive." It has **NO obstacle avoidance**. Landing is often rough (frequently a controlled crash). Use this only as a last resort. You **MUST** wait for a GPS 3D Fix and confirm the Home Point is set before taking off — otherwise the drone may fly away.
{% endhint %}

***

## 2. Emergency Procedures (S.O.P.)

If you encounter the following situations in the air, **stay calm** and follow these standard operating procedures:

| Situation                     | Symptoms                                                                | Suggested Action (S.O.P.)                                                                                                                                                                                                                                                                                                                                                                                                        |
| ----------------------------- | ----------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Video Loss (Black Screen)** | Goggles show static (snow) or a black screen, but control link is fine. | <p><strong>1. Don't Panic:</strong> Do not move the sticks wildly.<br><strong>2. Angle Mode:</strong> Immediately switch to <strong>Angle Mode</strong> (Self-leveling).<br><strong>3. Throttle Up:</strong> Gently raise the throttle to gain altitude (signal is better higher up).<br><strong>4. Listen/DVR:</strong> If video doesn't return in seconds, <strong>DISARM</strong>. Use Goggle DVR to find the crash site.</p> |
| **RxLoss (Signal Critical)**  | Radio announces "Telemetry Lost" or "RF Signal Critical".               | <p><strong>1. Raise Radio:</strong> Adjust antenna orientation (Antenna side facing drone, don't point the tip at it).<br><strong>2. Turn Back:</strong> Turn around immediately. Do not hesitate.<br><strong>3. Climb:</strong> Increasing altitude can help clear line-of-sight obstructions.</p>                                                                                                                              |
| **Stuck in Tree**             | Drone is stuck in branches, props cannot spin.                          | <p><strong>1. DISARM NOW!</strong><br><strong>2. NO Throttle:</strong> If motors are blocked, forcing throttle will <strong>burn the motors or ESC within 3-5 seconds</strong>.<br><strong>3. Wiggle:</strong> Use "Turtle Mode" to gently pulse motors. If it doesn't move, give up and climb the tree.</p>                                                                                                                     |
| **Intruder Alert**            | A person or child enters the flight area.                               | <p><strong>1. Land Immediately:</strong> Even crashing into the grass is better than hitting a person.<br><strong>2. Hover High:</strong> If you cannot land safely, fly high and hover until the area is clear.</p>                                                                                                                                                                                                             |

***

## 3. Crash & Recovery

Crashing is part of the FPV life. Here is how to handle it.

### The Savior: Turtle Mode (Flip Over After Crash)

When the drone lands upside down, you don't need to walk over to pick it up. You can flip it remotely.

{% stepper %}
{% step %}

### Disarm

Ensure the drone is disarmed.
{% endstep %}

{% step %}

### Switch ON

Flip the "Flip Over After Crash" switch on your radio (usually on an AUX channel).
{% endstep %}

{% step %}

### Push Stick

Push the Roll or Pitch stick fully to the side. Two motors will reverse spin to "flip" the drone upright.
{% endstep %}

{% step %}

### Switch OFF

Once upright, turn off the Turtle Mode switch.
{% endstep %}

{% step %}

### Re-Arm

Arm and take off.

Note: Be careful in tall grass. Long grass can wrap around motors and cause burnout.
{% endstep %}
{% endstepper %}

### How to Find a Lost Drone?

{% stepper %}
{% step %}

### Motor Beacon

Even if the battery is connected, disarm and flip the assigned "Beeper" switch. The motors will emit a beeping sound (Dshot Beacon). It's quiet, but audible in silence.
{% endstep %}

{% step %}

### DVR Replay

Your goggles automatically record video. Take them off and replay the last few seconds of footage. Look for landmarks to pinpoint the location.
{% endstep %}

{% step %}

### GPS Coordinates

If you have GPS, check the last known Latitude/Longitude on your radio screen. Enter them into Google Maps on your phone.
{% endstep %}

{% step %}

### Autonomous Buzzer (Optional)

We recommend advanced pilots install a self-powered buzzer (like **VIFLY Finder**). Even if the main battery is ejected during a crash, it will beep loudly for 24+ hours.
{% endstep %}
{% endstepper %}

{% hint style="info" %}
"Better to crash the drone than to hurt a person."

If you feel you have lost control, **DISARMING** is always the cheapest option. Replacing a few parts on a MARK5 costs a little money, but hospital bills and legal liabilities cost far more.
{% endhint %}


